CCI Percussion Caps #10 Box of 1000 (10 Cans of 100)
CCI Primers are continuously tested and improved. As a result today’s CCI primers are more sensitive, easier to seat and more compatible with progressive and automated loading equipment than ever before. They utilize modern non-corrosive and non-mercuric initiator mixes for the cleanest burn possible. CCI Percussion Caps #10 Box of 1000 (10 Cans of 100)
#10 caps are for some imported revolvers having smaller nipples
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
WARNING: Specifications
Product Information
| Quantity | 1000 |
Delivery Information
Shipping Weight | 0.770 Pounds |
DOT-Regulated | Yes |
Carrier Restrictions |
|
CCI Percussion Caps 10 Box of 1000
Johnny Oneshot –
Work well on Pietta pistols.
Submitted 2 months ago
From NY
Verified Buyer
The number 10 caps have a longer skirt than the number 11’s. Therefore, they have more surface area to fit onto the tapered nipples. The number 10 has a height of .066″ The number 11 has a height of .047″ That’s the basic difference.
Work well on Pietta pistols.
Mark –
Getting hard to find
Submitted 2 years ago
From Virginia
Verified Buyer
My experience is my Piettas use 10s, and my Ubertis use 11s. I pinch the 11s just a bit if they need to be snugged up. Pro tip: use a wood dowel or pencil eraser to push the caps on. They probably will never go off while putting them on, but if one ever does your thumb will never be the same.
Aubry –
I will buy this product again
Submitted 7 years ago
From Midland Texas
Verified Buyer
These caps work exactly as I expected.
Philip –
Good Caps
Submitted 6 years ago
From California
Verified Buyer
CCI No. 10 Caps ended up fitting my original Remington .44 perfectly. They also fit both of my Cimmaron Colt 1860s perfectly. So, I am very happy with this, since finding the right Cap makes a world of difference from Caps which are too loose or too tight.
JB –
My new favorite percussion caps.
Submitted 7 years ago
From Wichita Falls, TX
Verified Buyer
I’ve been using another brand of caps. I decided to try CCI caps and I found them to be superior to my old brand. They fire a little hotter so I get excellent ignition every time. I’ve had miss fires in the past, but no more since I switched.
Will –
CCI #10 caps?
Submitted 8 years ago
From LENOIR NORTH CAROLINA
Haven’t gotten a reply from company but will #10s fit a #11 nipple? I called PIECEDGE maybe three months ago to order #11 caps and was told they would be in stock the middle of July. There are only a few days left in July.This is the 24th day of July.Number 10s are coming to this store but I believe these won’t fit a #11 nipple. Anyone have any percussion caps for sell trade or give away? I need these caps to just shoot my rifles and pistols so I would appreciate any information where they(caps) may be obtained.
Gary –
Very reliable and …
Submitted 13 years ago
From Houston, TX
Very reliable and affordable Product. Buy in bulk or the Hazardous Material Fee will not make an online purchase worthwhile.
Eric –
I would buy this product again at hopefully a lower price
Submitted 18 days ago
From Undisclosed
Verified Buyer
These are the right fit for your blackpowder revolver. Price is ridiculous, but then what isn’t these days? CCI is always top notch. The limit on the number of cans is what makes the Hazmat charge so hard to swallow
Fitz –
Fit is excellent
Submitted 4 years ago
From O’side Calif.
Verified Buyer
I can use the CCI percussion caps on all my black powder pistols and rifles. The fit is excellent and do not fall off. I have had some non ignition issues but overall I’m happy with them.
C & P shooter –
Reliable but too small for pistols
Submitted 6 years ago
From Virginia
Verified Buyer
Reliable, no misfires. A bit too small for cap and ball pistols. They will fit but it takes extra time to seat them so the cylinder turns. Number 11 is what you need. CCI 11 is the same size as Remington 10
BOB L –
CCI GREAT PERCUSSIONPTIMER
Submitted 7 years ago
From MID FLORIDA
GREAT PRIMER NEVER FAILS
WAYNE –
The CCI number 10 caps …
Submitted 13 years ago
From DAVENPORT, IA
The CCI number 10 caps work well with my Uberti percussion revolvers, while my Pietta revolvers work well with CCI number 11 caps. However, I recommend trying a tin of several brands and sizes of cap before purchasing a substantial quantity.
D –
10 vs 11 Caps
Submitted 8 years ago
From Shelby Twp, Mi.
No. 11 Caps The No. 11 cap has an inside diameter of approximately 0.17 inch and fits a greater variety of black powder guns than any other cap. It is the standard cap for muzzle-loading pistols, rifles and shotguns. For this reason, ammunition factories produce more No.11s than any other percussion cap. No. 10 Caps No. 10 percussion caps are slightly smaller than No. 11 caps, and are the proper size for black powder cap-and-ball revolvers. The difference in diameter is minimal, and revolver owners often successfully use No. 11 caps because of their greater availability. The shooter who has problems with caps falling off the nipples must purchase the less-common No. 10 caps, or replace the nipples with a larger size that will work with the No. 11 caps. Read more : http://www.ehow.com/info_8699648_difference-10-11-percussion-caps.html
Bruce –
These caps do not fit any …
Submitted 13 years ago
From Capitola, Ca
These caps do not fit any of my three BP revolvers. They are too tight for the nipples and don’t seat properly. When you do get them seated far enough on the nipple to be able to rotate the cylinder, you will get 80% misfires on the first try. They will fire on the second. But, when they fire, make sure you have first aid handy. I got a bad burn from a flying piece of cap on a light load in my 1851 Navy model and a piece of cap stuck in my trigger finger from my 1858 Army model. This has never happened with the Remington #10 caps.